3D geological model of the bauxite-bearing district Bnižnica (Posušje, BiH): A powerfull tool from 3D visualization of geological structures to geological prospecting

Znanstveni rad - Sažetak

• Autor: Ivica Pavičić
• Autor: Ivan Dragičević
• Autor: Ida Pavlin
• Autor: Filip Šegović
• Autor: Vladislav Brkić
• Autorova ustanova: Sveučilište u Zagrebu; Rudarsko-geološko-naftni fakultet; (Zavod za geologiju i geološko inženjerstvo)
• Autorova ustanova: Sveučilište u Zagrebu; Rudarsko-geološko-naftni fakultet; (Zavod za naftno-plinsko inženjerstvo i energetiku)
• Znanstveno / umjetničko područje, polje i grana: TEHNIČKE ZNANOSTI; Rudarstvo, nafta i geološko inženjerstvo
• Znanstveno / umjetničko područje, polje i grana: PRIRODNE ZNANOSTI; Geologija

Sažetak (engleski)

Bauxite deposits formed during the terrestrial phase between the Upper Cretaceous and Paleogene periods represent the most valuable bauxites economically in the Adriatic Carbonate Platform (AdCP) area. The deposits formed during Upper Cretaceous-Paleogene emersion are present on the entire AdCP. One of the largest and most exploited area is the Posušje bauxitebearing area in western Herzegovina. Geological exploration and exploitation were very intensive between 1950 and 1990, but after that time, exploration was terminated by war events. This work aimed to collect all available data, systematize them into a 3D geodatabase and construct a 3D geological model of Snižnica, one of the most complex districts in the Posušje bauxite-bearing area. The results of this work are a composite geological map, 15 geological sections, and a 3D geological model with structural-kinematic analyses in a 3D environment and 3D bauxite prospection. The structural- kinematic analyses include fault movement analyses, the thickness of Paleogene deposits, which is important for drilling planning, reconstruction of eroded part of the Paleogene deposits in the hanging wall, spatial analysis of bauxite deposit locations, and azimuth and dip angle distribution of the palaeorelief surface. The results indicate that displacements on individual faults range between 0 and 100 m, while the maximum cumulative displacement is estimated to be ≥ 250 m (Pavlin and Šegović 2022). The thickness of Paleogene deposits ranges from 0 to almost 200 m, while the thickness of the eroded part of Paleogene deposits reaches up to 100 m (Pavlin and Šegović 2022). Maps of azimuth and dip angle distribution of the palaeorelief surface and analysis of structural positions of bauxite deposits indicate that a larger number of deposits are in the anticline and syncline hinge zones, which indicates that the depressions in the palaeorelief are partly structurally predisposed (Pavlin and Šegović 2022). The constructed 3D geological model and the conducted analysis can serve as a basis for planning further exploration works, primarily drilling holes to find new bauxite deposits.

• Ključne riječi (engleski): 3D geological modeling; Bauxite deposits; Mineral Prospecting; Posušje (BiH)
• Jezik: engleski
• Vrsta publikacije: Znanstveni rad - Sažetak
• Status objave: Objavljen
• Vrsta recenzije: Nije recenziran
• Verzija publikacije: Objavljena verzija rada (izdavačev PDF)
• Naslov zbornika: Environmental, structural and stratigraphical evolution of the Western Carpathians : abstract book
• Brojčani podaci: str. 109
• ISBN: 978-80-223-5518-6 (printed version)
• ISBN: 978-80-223-5519-3 (online version)
• URN:NBN: urn:nbn:hr:169:838381
• Datum objave publikacije: 2022
• Skup: Naziv: 12th ESSEWECA Conference; Lokacija: Bratislava, Slovačka; Organizator: Comenius University Bratislava, Faculty of Natural Sciences; Datum početka: 2022-12-08; Datum završetka: 2022-12-09; Vrsta izlaganja: Postersko izlaganje
• Vrsta resursa: Tekst
• Izdavač: Comenius University
• Mjesto izdavanja: Bratislava
• Prava pristupa: Otvoreni pristup
• Datum i vrijeme pohrane: 2023-07-11 09:18:47