prikaz prve stranice dokumenta Determining metal content in waste printed circuit boards and their electronic components
  Preuzmi
PDF 1.18 MB
Znanstveni rad - Izvorni znanstveni rad
Determining metal content in waste printed circuit boards and their electronic components
Journal of Sustainable Development of Energy, Water and Environment Systems, 8 (2020), 3; 590-602. https://doi.org/10.13044/j.sdewes.d7.0312
Anić Vučinić, Aleksandra; Bedeković, Gordan; Šarc, Renato; Premur, Vitomir

Citirajte ovaj rad

Anić Vučinić, A., Bedeković, G., Šarc, R. i Premur, V. (2020). Determining metal content in waste printed circuit boards and their electronic components. Journal of Sustainable Development of Energy, Water and Environment Systems, 8. (3), 590-602. doi: 10.13044/j.sdewes.d7.0312

Anić Vučinić, Aleksandra, et al. "Determining metal content in waste printed circuit boards and their electronic components." Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 8, br. 3, 2020, str. 590-602. https://doi.org/10.13044/j.sdewes.d7.0312

Anić Vučinić, Aleksandra, Gordan Bedeković, Renato Šarc i Vitomir Premur. "Determining metal content in waste printed circuit boards and their electronic components." Journal of Sustainable Development of Energy, Water and Environment Systems 8, br. 3 (2020): 590-602. https://doi.org/10.13044/j.sdewes.d7.0312

Anić Vučinić, A., et al. (2020) 'Determining metal content in waste printed circuit boards and their electronic components', Journal of Sustainable Development of Energy, Water and Environment Systems, 8(3), str. 590-602. doi: 10.13044/j.sdewes.d7.0312

Anić Vučinić A, Bedeković G, Šarc R, Premur V. Determining metal content in waste printed circuit boards and their electronic components. Journal of Sustainable Development of Energy, Water and Environment Systems [Internet]. 2020. [pristupljeno 14.11.2024.];8(3):590-602. doi: 10.13044/j.sdewes.d7.0312

A. Anić Vučinić, G. Bedeković, R. Šarc i V. Premur, "Determining metal content in waste printed circuit boards and their electronic components", Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 8, br. 3, str. 590-602, 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:169:509913. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:169:509913
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Determining metal content in waste printed circuit boards and their electronic components
AutorAleksandra Anić Vučinić
AutorGordan Bedeković https://orcid.org/0000-0002-1083-5218
MBZ: 205792
AutorRenato Šarc
AutorVitomir Premur
Autorova ustanovaSveučilište u Zagrebu
Geotehnički fakultet
Autorova ustanovaSveučilište u Zagrebu
Rudarsko-geološko-naftni fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Rudarstvo, nafta i geološko inženjerstvo
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Interdisciplinarne tehničke znanosti
Sažetak (engleski)
A wide range of published scientific articles on metal content in printed circuit boards show that it is necessary to determine the content of individual metals. The aim of this paper is to show how metal content varies according to the type and age of waste electrical and electronic equipment collected in the Republic of Croatia. Samples of cell phones, TV sets, and computers are collected. The metal content is determined for electronic components and printed circuit board base plates separately for different grain sizes (1-4 mm, 0.5-1 mm, 0.1-0.5 mm and < 0.1 mm). The results show that electronic components form a larger part of printed circuit board mass fraction depending on the equipment age and type. Generally, electronic components do have a higher mass fraction for most metals (like: aluminium, copper, nickel, zinc, gold, and silver in most cases) in comparison to printed circuit board base plates, but for certain metals (like: lead, tin) the opposite applies. The electronic components of larger grain sizes (1-4 mm and 0.5-1 mm) contain more aluminium, copper, and zinc, and less lead, while the smaller grain size fractions are richer in gold. The bare boards base plates of larger grain sizes contain more copper, lead and tin, while the smallest grain size class (< 0.1 mm) contains more aluminium and gold. No clear trends are noticed in the case of silver and lead.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaJournal of Sustainable Development of Energy, Water and Environment Systems
Brojčani podacivol. 8, br. 3, str. 590-602
e-ISSN1848-9257
DOIhttps://doi.org/10.13044/j.sdewes.d7.0312
URN:NBNurn:nbn:hr:169:509913
Datum objave publikacije2020
URL dokumentahttp://www.sdewes.org/jsdewes/pid7.0312
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2020-10-29 13:50:28