| Sažetak (engleski) | The Organic Rankine Cycle (ORC) is commonly accepted as a viable technology to convert from low to medium temperature geothermal energy into electrical energy. In practice, the reference technology for converting geothermal energy to electricity is the subcritical simple ORC system. Over time, geothermal ORC plants with more complex configurations (architectures) have been developed. In the open literature, a large number of advanced architectures or configurations have been introduced. An analysis of the scientific literature indicates that there is some confusion regarding the terminology of certain advanced ORC system architectures. A new categorization of advanced configurations has been proposed, with a special emphasis on the application of geothermal energy. The basic division of advanced plant configurations is into dual-pressure and dual-stage ORC systems. In this study, the real potential of advanced ORC architectures or configurations to improve performance as compared with the simple ORC configuration was explored. The research was conducted for a wide range of geothermal heat source temperatures (from 120 °C to 180 °C) and working fluids. Net power output improvements as compared with the basic subcritical simple ORC (SORC) configuration were examined. The ability to produce net power with different ORC configurations depends on the magnitude of the geothermal fluid temperature and the type of working fluid. At a lower value of geothermal fluid temperature (120 °C), the most net power of 18.71 (kW/(kg/s)) was realized by the dual-pressure ORC (DP ORC configuration) with working fluid R1234yf, while the double stage serial-parallel ORC configuration with a low-temperature preheater in a high-temperature stage ORC (DS parHTS LTPH ORC) generated 18.51 (kW/(kg/s)) with the working fluid combination R1234yf/R1234yf. At 140 °C, three ORC configurations achieved similar net power values, namely the simple ORC configuration (SORC), the DP ORC configuration, and the DS parHTS LTPH ORC configuration, which generated 31.03 (kW/(kg/s)) with R1234yf, 31.07 (kW/(kg/s)) with R1234ze(E), and 30.96 (kW/(kg/s)) with R1234ze(E)/R1234yf, respectively. At higher values of geothermal fluid temperatures (160 °C and 180 °C) both the SORC and DP ORC configurations produced the highest net power values, namely 48.58 (kW/(kg/s)) with R1234ze(E), 67.23 (kW/(kg/s)) with isobutene for the SORC configuration, and 50.0 (kW/(kg/s)) with isobutane and 69.67 (kW/(kg/s)) with n-butane for the the DP ORC configuration. |
